Exceeding MIL-STD 810C/D/E/F rating, the HT Series 2.0 is designed to withstand shock, vibration, dust and moisture, ensuring a tough enduring performance and many years of trouble free use, even in the most hostile environments. Intelligent Li-Ion Battery Entel’s Lithium-Ion Batteries provide the following key advantages. Requirements the radio may have been customised by your Entel authorised dealer. Cloning Your Radio. On HT series batteries a breathable membrane is.
.User Guide – HT900T Series v10/10 Professional submersible MPT1327 handheld transceivers ATEX approved Intrinsically Safe Common Information (all models) II 2 G Ex ib IIC T4 Ex ib IIC T4 HT912T/922T/982T(U) Entry HT915T/925T/985T(U) Advanced MPT1327, 8-key HT916T/926T/986T(U) Advanced MPT1327, Full Keypad.Introduction This guide covers the basics of your radio’s operation. To meet your exact requirements the radio may have been customised by your Entel authorised dealer. These features will be explained in a separate guide issued by the dealer. Table of Contents Common Information (all models) Page Certification.Certification Declaration of Conformity We Entel UK Limited of: Entel UK Ltd 320 Centennial Avenue Centennial Park Elstree Borehamwood Hertfordshire WD6 3TJ United Kingdom Declares under our sole responsibility that the product range: HT900 MPT Series Handheld Radio Transceiver Conforms to the following standards or other nominative documents:.Turn the transceiver off in the following locations outside wash the transceiver in fresh water.
If washing with the of the radio’s ATEX approval rating: battery removed from the radio, ensure that the battery.This process will need end of its useful life. Non ATEX batteries will not to be repeated if the battery is allowed to completely work on ATEX radios ensuring customer safety.CHP950HS Single earpiece heavy duty ear defender headset with boom mic for hard hat & VOX. Note: The use of non Entel approved accessories will invalidate your ATEX intrinsically safe approval. Refer to certificate Sira 10ATEX 2066X for permitted accessories.Optional Accessories cont.
CHP950HD Double earpiece defender headset with boom mic and in line PTT for hard hat & VOX. CHP950D Double earpiece headband defender headset with boom mic and in line PTT & VOX. CHP950BT Bluetooth double earpiece headband defender headset with boom mic and ear cup PTT. VOX = Voice Operated Transmit (hands free operation) Bluetooth option board in radio is required to use Bluetooth audio accessories.
Entel Ht Series Clone 1
HT544 IECEX INTRINSICALLY SAFE Marine Portable VHF Submersible to IP68 (5 metres for 1 hour) 156 - 163.275MHz INT, USA, CAN Marine ChannelsThe first time you handle Entel’s HT544 Series 2.0 portable you will be impressed by its superior build quality. The HT544 has been designed specifically for those requiring a no compromise marine portable. From the rugged ergonomic design that fits comfortably in your hand, to the exceptionally loud audio, the HT544 Series 2 portable easily outclasses the competition.The HT544 is supplied preprogrammed with all INT, USA and CAN channels.As standard the HT544 is supplied with:. CNB550E - Rechargeable 1800mAh Lithium-Ion battery pack. CCA - Trickle charger pod. CBH750 - Spring loaded belt clip. CATXX - High efficiency antenna.
CWCHT - Mains adaptor. Entel is the first manufacturer to offer the superior IP68 specification, whereby we ourselves determine at what depth and for how long our equipment must remain waterproof.
Not content with just the standard IP67 entry-level (1 metre for 30 minutes) Entel's IP68 HT series is certified as waterproof-submersible to an unprecedented depth of 5 metres for 60 minutes. Aware that the smallest tolerances of case size and material variation alone could compromise your radio's waterproof integrity, uniquely, each individual Entel portable is tested on a custom-built air pressure test-jig to ensure it meets the exacting high standards we have set for ourselves.
All Entel portables come with the latest intelligent Lithium-Ion battery technology as standard. Whichever model you choose, these batteries will count the number of completed charge cycles, which on LCD variants, if dealer enabled, can be displayed when you power-on your radio. For your convenience it will even alert you to imminent battery life expiration. Another advantage of Lithium-Ion battery technology is the way it maximizes duty cycles, while the elimination of memory effect means there is no need to fully discharge the cells before recharging. Therefore you are assured a full duty cycle each and every time you take your radio from its charger. CNB550E – Lithium–Ion battery pack for the HT U.S.T.C series hand portable radio. The CNB550E is an 1800mAH Lithium–Ion lightweight battery pack for the HT U.S.T.C series of hand portable radios.
The Lithium–Ion technology gives the radio a long operating time and the batteries will not suffer from the ‘memory effect’ that can be experienced on radios using alternative battery chemistries.CSAHT – Single-unit rapid charger for the HT series hand portable. This intelligent rapid mains charger ensures that the battery only receives the correct amount of charge.
Charge status is indicated via a multi-coloured LED so you will know whether the battery is fully charged before use. Charger operates between 100-240V. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 2.5 hours. The charger can be either desk or wall mounted.CSBHT - Six-unit multi rapid charger for the HT series hand portable radio. This six-unit intelligent rapid mains charger ensures that the batteries only receive the correct amount of charge. Charge status is indicated on each pod via a multi-coloured LED so you will know whether the battery is fully charged before use.
Charger operates between 100-240V. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 2.5 hours.CCA230 - Single-unit regular charger for the HT series hand portable radio. Single-unit 230V mains regular charger for the HT series hand portable radio. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 3.5 hours. The charger can be either desk or wall mounted.CCA110 – Single–unit regular charger for the HT series hand portable radio. Single unit 110V mains regular charger for the HT series hand portable radio. Due to the high capacity of the HT Li–Ion battery pack, charge time is around 2-6 hours.
The charger can be either desk or wall mounted.CCA12 - 12V DC regular charger for the HT series hand portable. A charger pod and cigar lighter lead for regular charging of the HT series batteries from a 12V DC source. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 3.5 hours. The charger can be either desk or wall mounted.CWCHT-12 - Cigar lighter lead for the HT series hand portable.
A spare cigar lighter lead for the CCA trickle charger pod.CWC750 - Mains adapter for the HT series CCA regular charger pod. A spare mains adapter available in either 230V Euro 2 pin or UK 3 pin and 110V 2 pin options. Specify when ordering. CMP500 - The CMP500 is attached with a revolving clip and allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments.EA12/950 – ‘D’ shaped earpiece and tie clip microphone for the HT U.S.T.C series hand portable radio. A ‘D’ shaped, soft rubber-feel earpiece which fits over your ear.
This is connected to a combined tie clip microphone and press to talk button via a curly cable. A rotating strain relief clip can attach to your collar to prevent the earpiece being dislodged if the cable were pulled. The EA12/950 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.EA15/950 - Acoustic tube earpiece and tie clip microphone for the HT U.S.T.C series hand portable radio. A clear acoustic tube earpiece which fits in your ear using the small or large soft pink ear plugs supplied.
This is connected to a combined tie clip microphone and press to talk button (PTT). The EA15/950 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is particularly suited to covert, security applications.
This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.EA19/950 - 'D' shaped earpiece with boom microphone for the HT U.S.T.C series hand portable radio. A ‘D’ shaped, soft rubber-feel earpiece which fits over your ear.
Flw
The earpiece is combined with a lightweight short profile boom microphone. There is an in-line press to talk button (PTT) with clip. The EA19/950 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.EPT40/950 - Bone conductive earpiece microphone for the HT U.S.T.C series hand portable radio. The combined microphone/earpiece allows discreet communication with no visible microphone.
The earpiece connects via a quality in line connector to a large rugged waterproof press to talk (PTT) button that can clip on to a belt or other suitable position using the rugged revolving clip. The press to talk switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing. As with all bone conductive accessories, we do not recommend using voice operated transmit (VOX).CXR5/850 - Bone conductive skull microphone with in-line PTT for the HT U.S.T.C series hand portable radio. A high quality rugged bone conductive skull cap. The fully adjustable CXR5 fits on your head similar to a cap. The metal frame supports the bone conductor microphone which fits on adjustable straps and sits on the top of your head.
The adjustable twin earpieces clip into position each side. The robust cable exits the skull cap from the rear and attaches via a quality in-line connector to a large rugged waterproof press to talk switch that can clip on to a belt or other suitable position using the rugged revolving clip. The press to talk switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing. As with all bone conductive accessories, we do not recommend using voice operated transmit (VOX).CXR16/850 - 'D' Shaped earpiece, throat microphone with large in-line PTT for the HT U.S.T.C series hand portable radio.
A high quality throat microphone with a comfortable soft-feel adjustable neck band. A rugged ‘D’ shaped earpiece accompanies the throat microphone and connects via a quality in-line connector to a large rugged waterproof press to talk switch that can clip on to a belt or other suitable position using the rugged revolving clip.
The large sized press to talk (PTT) switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing.CHP850HS - Single earpiece ear defender (hard hat use only) with VOX for the HT U.S.T.C series hand portable radio. A heavy duty single ear-cup earpiece with high quality noise-cancelling boom microphone and designed to connect to any safety hard hat via the supplied universal adapter.
The headset provides both voice operated transmit (VOX) and a large easy-to-use press to talk button with spring-loaded clip, allowing the radio to be operated using a gloved hand or under clothing. We do stock a small range of common hard hat adapters which can be supplied in place of the universal adapter (please specify at time of ordering).CHP850HD CHP950HD – Double earpiece heavy duty ear defender with noise cancelling microphone VOX & in-line PTT. For hard hat use only, several helmet adaptors are available including a universal clipCHP850D - Double ear-cup ear defender with comfort headband and VOX for the HT U.S.T.C series hand portable radio. A heavy duty ear defender headset with high quality noise-cancelling boom microphone and comfort headband.
The headset provides both voice-activated transmit and a large easy-to-use press to talk (PTT) button with spring-loaded clip, allowing the radio to be operated using a gloved hand or under clothing.EHP950 – ‘D’ shaped covert style earpiece for the HT series hand portable radio. A ‘D’ shaped soft rubber-feel earpiece which fits over your ear. The earpiece is designed to connect into the HT series radio, via the locking accessory connector. (Note: before this accessory can be used, it is necessary for the dealer to enable the listen-only feature in the radio’s programming software). This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.
Tehnical SpecificationGeneralFrequency Range156 - 163.275MHzChannelsInternational (INT), USA, Canadian (CAN) & Private ChannelsChannel Spacing25 kHzCommunication MethodSimplex / Semi duplexAntenna Impedance50 ohmAntennaHigh Efficiency HelicalBattery Type1800 mAh Li-Ion battery packPower Supply Voltage7.4V DCMicrophoneInternal condenser microphoneOperating Temperature-20° to +55°Weight277g with battery and aerialSize (mm)59.5(W) x 130(H) x 37(D)W = 59.5 (62 including protrusions)H = 130 (145 inc knobs)D = 37mm (41 including battery protrusions)Transmitter Power OutputSelectable. HIGH = 4W, LOW = 1WModulation16K0G3EOscillator MethodPLLFrequency Stability.